* All TV must be using HDMI port #1 for Bell TV signal or Kuusoft
* Remove Atmosphere dongles and give them to the Store manager
* Configure Kuusoft dongles with Kuusoft SSID wifi
* Set up 8 port KVM switch using only One Bell satellite receiver
* Setup a monitor and connect it to the port #8 of KVM switch
* Removal other two Bell satellite receivers
KVM switch port assignment
| Port 1 | Jumbotron /Power isle |
| Port 2 | Team room |
| Port 3 | Footwear |
| Port 4 | POS |
| Source | Bell Receiver |
| Port 5 | Service shop |
| Port 6 | |
| Port 7 | |
| Port 8 | Monitor |
Kuusoft dongle assignment
| kuusoft 1 | Customer service TV |
| Kuusoft 2 | POS TV (right) |
| kuusoft 3 | soccer TV |
| kuusoft 4 | Footwear TV |
| kuusoft 5 | service shop (Right) |
| kuusoft 6 | Power isle (only for 601) |
TV displays the following
| Location | Source |
| POS | Bell TV |
| POS (right side) | Kuusoft #2 |
| Jumbotron | Bell TV |
| Jumbotron | Bell TV |
| Jumbotron | Bell TV |
| Jumbotron | Bell TV |
| Footware | Bell TV |
| Footware (Middle) | Kuusoft #1 |
| Footware | Bell TV |
| Customer Service (entrance) | Kuusoft #1 |
| Service Shop | Bell TV |
| Service Shop (Right) | Kuusoft #5 |
| Team room | Bell TV |
| Soccer area | Kuusoft #3 |
| Lunch room | Bell TV |
| Power isle (only for 601) | Bell TV |
| Power isle (right) only for 601 | Kuusoft |
How to configure Kuusoft dongles
1. Find a monitor with HDMI port
2. Find a mouse
3. Connect a kuusoft dongle to a HDMI port of a monitor
4. Connect power to Kuusoft dongle using USB cable and a power adapter
5. Connect a mouse to the kuusoft dongle using usb-c to ucb convertor
6. You should see Kuusoft screen. click on right mouse button
7. you will see system options and a screen keyboard
8. click on System settings and select wifi SSID "Kuusoft"
9. SSID password is "Kuus0ft!"
10. Save settings and restart the dongle by unplugging its power
11. Ensure marketing content are displayed.
12. continue program other dongles
Here are instructions on How to Setup your Nano-PC4 (Wi-Fi).
Here are instructions on How to Configure the Wi-Fi Settings on a Nano-PC4.